Eurow Australian Merino Sheepskin Car Seat Cover, Plush Universal Fit for Most Vehicles, Summer Cool & Winter Warm, Side Airbag Safe, Easy Installation, 56 x 23 Inches, Single Seat, Gray

Our beloved 2000 Honda Insight has the seats in pretty good condition and I had installed ~$30 seat covers 4 years ago right after the purchase. My recent effort to pay some attention to the car included possible upgrade to the seats. I finally decided to give these grey sheepskin seat covers a try after many hours of search for leather/PU leather/other sheepskin products. I needed one piece cover since the headrest is not a separate unit in our car. I was ready to purchase custom seat covers as well, but give the super rarity of this car, I couldn't find any reliable source. I wasn't comfortable with a few available items as neither was I sure about the fit and finish, nor their return policy. I received these covers in the morning and just installed them in the afternoon. The process was very simple and easy. I did not remove the old seat covers and decided to leave them underneath. The 6 attachment hooks for the bottom piece wrap around the seat, 2 each from each of the 4 sides and clip into a round piece of plastic with 6 attachment holes. That was extremely helpful and wasn't that difficult for me to accomplish given small room under the seat. The headrest covers were a bit loose, therefore, I folded them from the back side and ran a zip tie through to tighten. The fit, finish, and comfort are superb! Not sure if any other strange human being with another Insight will be looking for seat covers, if you do, please give it a try. In general, for other makes and models, this cover is really well-made, looks good, and feels good.

These seat covers really surprised me. First, my girlfriend's car had some beat seats so we put these on. Second they fit great not weird looking like other covers. Third the quality is great. I have taken them out and washed them in a washer and hung dry them and no degradation. Keep you warm in the winter and can take a beating. Highly recommend.

*ORIGINAL May 12th, 2021* Has real sheepskin on the seating portion as advertised. It’s really the only part that it’s needed in. I haven’t had any static issues. But then again. I’ve only got about 100 miles on it. I got it because leather seats are just sweaty and sticky here in the AZ heat. Aircraft have very similar quality seats. It’s super comfortable and appears to have exceptional quality. If you have similar seats to mine, you can have a good clean installation. Take your time and remove any panels or armrests. Then, once the seat covers are installed, make any small incisions needed and reinstall all the previously removed panels or armrests. I think mine came out pretty well. It appears to be excellent quality and I’m glad I didn’t drop $300(for one seat) like I originally intended on doing. Especially considering I don’t see a difference between this and what we use in aviation(except for the faux sides instead of a canvas or pleather). Time will be the ultimate test as with any product. So now I plan to apply time. Before I do that though, I’ll just pick up another one for the passenger seat. I’ll be back to update. *UPDATE June 4th, 2022* So it’s been a little over a year and just over 13,000 miles on these seats. I feel it’s appropriate to update my experience with these seat covers. Truthfully, I feel time has been friendly to them. These seat covers are the best bang for the buck if you’re looking for sheepskin. Here are some tips, things to consider, experiences you may have. The fur is still dense and in great shape. If you look on YouTube you can find videos that will help you maintain them. You do have to brush these(gently!) every now and then to keep them from matting. You could buy something like a cat brush. I’ll usually brush them while I’m at the car wash vacuuming. Another thing to understand when buying these is that they may have a funk to them at first. Like a dead animal funk… but the smell goes away after about 3 weeks. Another thing to know is the backside is faux and will shed if messed with. This hasn’t been an issue for me at all. Attached is a picture taken about a week ago with my back pack on the passenger seat. As you can see I indeed got one for the other side. No Ragrets…

I just put these on our 2015 Honda CRV LX. Like all universal products, they are a challenge to install. On the Honda, the driver seat is different than the passenger seat. On the passenger seat, there is a opening that the shoulder strap passes through, that doesn't exist on the driver's side. So on the passenger side you can pass one of the retainer straps through that opening an hook it to the ring. On the driver's side I had to go outside right over the garnish, so that one shows, no big deal. On the passenger side only there is an open plate that you need to install the straps above that plate, or you will be pulling the straps when the seat is moved forward and backwards. They fit pretty well with plenty of material, in fact the seat wraps partially under the seat at the front. The headrest is not square, so you have a little extra material at the top. Another word on installation, on the back / seat juncture, there is not opening as most seats have. There is a piece of material that goes from the back of the seat and continues to hook on the seat springs. What you have to do is push the hook / strap between the seat and back and you can come out at the outboard sides and pass the strap under the seat. Tricky, but doable. Just make sure you have all six straps in a position to reach them and then hook them into the ring, putting them on opposite sides to keep the ring close to center, repeat that until you have all six in their holes in the ring. These will shed quite a bit, so just vacuum them really well and you'll have a comfy set of seat covers. I rate these up or down, depending on how they hold up to use.

This product fit very well for a universal fit, I have a Honda CRZ which is unusual enough, however the seat covers fit the integrated head rest really well, it was a challenge to connect the hooks, but that’s not the seat covers fault, but a low slung seat with very little room for your hand. I LIKE IT!

Product was as described, well made, arrived a few days early. A little bit of a time/struggle to get them on but definitely worth the effort

It fit well and is super comfortable. BUT... it doesn't tie well under or behind the seat. You have to continually tuck it in. But overall worth the money. $125CAD

I always like Sheep skin seat covers. Right out of the box, you can see the quality of these. They went in nice and snug. The seat attaches with 6 straps so they stay in place. I would by again but judging from the quality, I want have too.

Fit my 2018 F350 Lariat seats perfectly.