Universal led Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle

Hello All, I purchased this light because my 2016 HD Iron 883 only has the 2 bullet lights and I didn't feel THAT safe about people being able to see me day or night. So, I originally bought a taillight that "fit" the Harley sportsters underneath the fender and was supposed to be flush. If you're looking at this review, you've probably seen what I'm talking about if you searched the sportster taillights like I did. DO NOT BUY THE BIG LIGHT I INCLUDED BELOW Motorcycle Smoke LED Stop Brake License Plate Rear Tail Light Stop Running Light for Harley(Smoke Lens) ***BUT, the one I bought was so thick! It stuck out about an inch from the bottom of the fender. Then, when my girlfriend and I 2 upped on my motorcycle, we hit a speed bump going average speed and the suspension dipped so low that it was literally DESTROYED by the wheel. Like seriously, Why would they make a light that sticks so low that it literally had less than an inch of clearance from the tire!! SO, I stumbled upon this light to replace the the poorly designed one that broke. I wanted something that had a good amount of clearance and/or was completely away from the tire altogether. This light is flexible, bright and easy to wire. The wire diagram included in the product photos is exactly how it is. Self explanatory. I did not use the turn signals as I rely on my bullet taillights as turn signals and I had originally hooked it up as a brakelight with a flashing module. I included what I used in the product link: Vehicle Brake Light Flasher Module. Safety Flash Light Alert. Universal. For Motorcycles and Cars. ***HERES THE THING.... The original light they sent me had 4 burnt out LEDs for some reason. As you can see in 3 of the photos I included, the working lights did flash when brakes were applied. However the 4 right LEDs were dead. I contacted the seller and they sent me a replacement ASAP! The seller was great and I received the new light quickly and it works with no problem at all! So thank you to the seller for providing excellent customer service! I will be highly recommending this light! Can't wait to ride my baby with the comfort of knowing that people will be able to see me clearly day/night! I included photos of it off and on and you can really see how bright they are even during the day!

*READ BEFORE BUYING* Alright, time for one of my many honest reviews on here. This light works. It is flexible. And I didn’t believe everybody complaining about how small the wires were coming from the light, but they are extremely small. Like 26 gauge wire. But with a careful set of hands, I managed to wire them into my stock OEM ATV brake light harness. This light comes with 5 wires. One for a negative. One for a running light. One for the bright brake light. And two for turn signals (left and right). I did not use the turn signals. So I wrapped them up and made them water tight just like I did with everything else including the connections I made to the wiring harness. As far as waterproof goes I’d give it a 3 out of 5 stars. They really didn’t do much to make any seals around both sides of the light. Even where the wire goes in, and the other side as well. But was easily fixed with silicone gasket maker and a neat electrical tape job. Over all this product may be chinese, it could be russian, I don’t care. It works. No LED’s have died yet. I got it 2 days ago and wired it up immediately. So as far as a longevity thing goes, I’ll edit my review in a month or so after I put it through the ringer and give it a full opinion compared to these stupid other reviews. EDIT: Still holding up. Works perfect. Hasn’t lost brightness, no water issues, no LED’s burning out. Still works. EDIT TWO YEARS LATER: Sold the atv. Brake light worked correctly the entire time. No shorts, no issues. Guess it was just one of those weird products that are cheap but stupidly reliable. Bought a motorcycle now, will be purchasing another one.

I use these on all my bikes. Bright, simple to install if you read the advertisement on Amazon. No directions given with product so you’ll need the picture give on Amazon for selling the product to give you an indication of what wire should go where. It’s not rocket science to install. If you have difficulty installing, you probably don’t belong on a motorcycle. Only thing I don’t like is that the wire gauges are small. I mean they are delicate and easy to mangle if you’re a brute. Also the insulation on the wires don’t seem to be robust compared to better high quality alternatives. They are inexpensive so you get what you pay for. All the ones I have installed so far have worked for over a few years and all the LEDs have held up. We will see in a five year time of daily use and exposure to sun and elements. Till that day...another review might be in order.

Good product! The installation was confusing without a voltmeter. Pro tip: upload a photo of the diagram on the product pictures to ChatGPT and he’ll walk you through the whole thing. 4 stars and not 5 because, as others have said, the wires are very thin. Too thin for my splicers and I had to splice them with my fingers. But overall, it works well and the 3M tape holds nicely.

wiring very thin, not sure if I will install this yet?

Great light and super bright! Easy to install but the wires are very small so take care when stripping them to connect. I would strongly recommend this for the price and value.

Led brûlées, fils coupé, collant deux faces déjà enlevé..... bonne chance à vous!!

Placed the strip on my motorcycle's rear cargo box and LED's died after a week!! Pure garbage!!

It stopped working after few days