GYEON MOHS EVO Ceramic Coating for Cars High Gloss and Super Slick 30ml

Great product, I just installed on my second car, plus I installed on the hoods and roofs of the dailies.... holding up great, still beading when dirty... Very easy to install, good slickness, great shine, so far good durability. To install. clean car good, get a short pile micro fiber, for leveling and a longer pile towel for buffing. Take the applicator pad put on Some product work a 12X12 area or smaller, I like to cross hatch, all parallel strokes then vertical strokes very quickly, to ensure 100% coverage. Let dry roughly 15 seconds {depending on temp} then it will sweat then start to evaporate, and level off with the short pile towel overlapping the work area to blend. if its too sticky you waited too long. Wait 20 seconds more, and buff dry. Rinse and repeat. maybe do a final buff of the panel and move to the next panel. Let cure 24-48 hours and your done. ( my daily driven car sat outside over night, got dew on it and went to work the next day, 3 months still holding up) You can then add a top coat if you want.... I top it off with their ceramic detailer and it adds some shine and slickness. Then I maintain this top coat. So far i love it, I love the fast cure time makes it easy to install and the shine is very good.

Amazing Coating! For the price and ease of application this ceramic coating is the best bang for buck with results that show. I never write reviews but this is my second time purchasing Gyeon and I cannot say enough great things about it. The hydrophobic properties after prepping with the right steps is amazing. Leaves a gloss shine better than any wax or sealant and will last. Great stuff, highly recommend

I’m a detailer and it’s Super easy to apply, great quality, great price- buy it

On a brand new Tahoe I clay bar’d the entire vehicle followed by a machine buff, then an IPA wipe down before Ceramic coating. This was my 1st true Ceramic product used outside of a spray product & it was super easy to use! As they said, don’t over work the product, wipe off in 10 seconds max or when it “sweats” beads up after wiping. When I over wiped it the beading was slow & I ended up wiping in the time limit vs beading ans a signal to wipe. Only had one area that I had high spots from taking too long to wipe. A recoat & wipe quickly fix that on this midnight blue color. Just barely enough product to do the Tahoe, really wish it came with a little more product just to be safe or to wipe windows, because I’ve only used it on painted surfaces. I used a short nap towel for the 1st wipe off of product and immediately rewiped with a long nap for polishing. There’s no issue overlapping an area you already applied product on or wiping product off beyond the application area. I’d actually say do both to have no missed coverage of product & to best spread of product in wipe off too. Definitely don’t worry about those things when using it. I may need to buy another smaller bottle for a second coat on the lower body areas for best protection as I live in a winter climate & salt/grime is a big issue. Hopefully the product will perform in the long run but so far I’m thrilled with the application, look & feel of the product thus far. Finally, since it was my 1st time using a ceramic product I gave Gyeon USA a call to review a couple things and a real person answered the phone! Not only that but the individual was very knowledgeable & even said to call back with any thing else I may need. Sounds normal but as we know a live person answering their phone is becoming a rare thing so I give high praise to the company & their willingness to answer questions & help one out!!!

Strict application requirements

Had to choose between this and the gtechnic csl. Online reviews and videos swayed my decision. I paid to have our first tesla MY to be coated with csl. That held up great, until my wife traded it for a newer MY. Had the same guy installed ceramic again but I believe he cheapened out and used an inferior product. Wife recently got another car and I decided to do the coating myself. Washed and prepped the car doing surface correction to get rid of water spots, water streaks and light scratches as needed before finally applying G MOHS. This thing dries fast! You really have to work in small manageable areas. It was about 70 degrees out and I was inside the garage and it would “sweat” immediately after applying with the sponge. Other than that, once you spread and wipe, you’re done! Pretty slick finish and mirror like look! I am pretty happy and I highly recommend this product ! I got the 60ml and it was just enough for the entire R1S, allowing a second coat on the hood! Make sure you view in every angle to check for high spots i was constantly checking with lights around every panel. Definitely a lot of work but worth the effort!

It’s a good ceramic coating, I went through just about one bottle on this truck took it through a carwash about 2 weeks later and the water was beading like crazy but either driving it or taking a leaf blower to dry it the water just flies off. Looks like I just paint corrected it

Gyeon Mohs is overall a great ceramic coating. I am a certified auto detailer through Gyeon and I always stand by their products. This ceramic coating in particular offers great protection and lasts a long time with proper maintenance. With that being said, this coating WILL NOT hold up if you are not maintaining it correctly. I have experienced this first hand with customers and also my girlfriends vehicle. Be sure to do your maintenance washes and you will be ecstatic with this product. I live in MI so we deal with harsher weather. If your in a different climate, this coating will last even longer. The price point and size of the bottles are well worth it. Application is a breeze, hydrophobicity is second to none, depth and gloss are incredible.

Bisogna seguire attentamente le istruzioni prodotto veramente ottimo

Es la tercera vez que pido y es una excelencia