3M Engine Oil Additive (50 ml) | Effective Engine Lubrication and Power Transmission

I recently picked up the 3M Engine Oil Additive for my Suzuki V-Strom 250 SX, and I am extremely impressed with the results. To get the best out of it, I did a complete oil service: first, I ran an engine flush to clean out all the old, built-up gunk. After draining that completely, I poured in this 3M additive and then filled it up with fresh engine oil. The difference was immediate. The engine feels significantly smoother now, the gear shifts are slicker, and the overall power transmission feels much more refined with fewer vibrations. Since it comes in a pack of two 50ml bottles, it's perfectly sized for motorcycles. Highly recommended if you want to protect your engine and get a noticeably smoother ride! How to Use (For Motorcycle Oil Changes) Warm Up & Flush: Run the motorcycle for about 5–10 minutes to warm up the old oil. Turn off the engine, add your chosen Engine Flush, and let the bike idle for the duration specified on the flush bottle (usually 10–15 minutes). Do not rev the engine during this time. Drain the Old Oil: Turn off the engine and carefully drain the hot, flushed oil completely. Change the Filter: Always replace your oil filter when doing a flush to ensure no old contaminants mix with the new oil. Add the 3M Additive: Before adding the new oil, pour the 50ml 3M Engine Oil Additive directly into the engine oil filler hole. (50ml is an ideal ratio for the V-Strom 250's oil capacity). Fill the Engine Oil: Top off the engine with your preferred fresh engine oil until it reaches the correct level on the inspection window or dipstick. Circulate: Start the engine and let it idle for 3–5 minutes. This allows the new oil and the 3M additive to thoroughly mix and coat the internal engine components.

Additive is very good and effective . Also increase life of engine oil means more km before change . Easy to use

Using this for my RE 350 bike. Engine noise has reduced. Low friction noise. Increase in mileage and pickup. I drive daily 80km at speed between 70kmph to 110kmph and drive in almost heavily blocked areas. But mileage stays above 37kmph. If i maintain speed below 60, getting 42 mileage. Lot of improvement.

Hello everyone! 👋 I recently decided to try the 3M Engine Oil Additive (50ml). I used this during my last oil change, and the results are pretty amazing. If you’re serious about protecting your engine and getting smoother power, keep reading!. How I Used It and What Changed: Honda Unicorn 150cc 2012 launched model bike I'm tested. ​I simply added one 50ml bottle right along with my fresh engine oil (always check your bike's manual first, of course!). Within the first couple of days of riding, I noticed these improvements: Effective Lubrication & Engine Life: This additive gives a huge boost of confidence in engine protection. It feels like the oil itself is working harder and better. When the engine is cold, the start-up is less clunky. Even when running hot in city traffic, the performance doesn't drop off as sharply. It genuinely feels like it's reducing wear and tear. ​Power Transmission & Response: The power delivery is definitely more consistent and direct. You press the accelerator, and the response feels immediate. There’s less lag and more solid oomph coming from the engine. ​Gear Shifting: This was a pleasant surprise! My gear shifts feel smoother and more precise now. That slight hesitation or stiffness when shifting between 2nd and 3rd gear seems to have vanished. It’s a small detail, but it makes a huge difference in city riding comfort. ​Engine Sound & Vibration: The engine is noticeably quieter and less stressed. This leads to significantly lower vibrations during high-speed cruising. Worth the Investment? ​If you love your bike and want to ensure it stays in peak condition for years, this 3M Engine Oil Additive is a brilliant investment. It’s not just a feel-good product; you can genuinely feel the difference in gear changes and overall engine smoothness. It acts like an insurance policy for the internal parts.

I used this engine oil additive in my car, but honestly, I could not feel any noticeable change in engine performance, smoothness, or pickup. It was easy to use, but the results were not as expected. Maybe the difference varies depending on the vehicle, but in my experience, I did not notice any significant improvement.

good one

Good product it reduces the vibration and feel smooth operation of engine

Very good producty Nissan micra is 2015 model kilometer driven is 55k just I bought this oil after seeing many comments of positive feedback back from users I added to my car and taken for long drive the result is very good smooth feel in engine no evidence of noice in the cabin but I see no changes in gear box transmission the shifting gear are slightly hard as before But still the perfomance power and engine smooth is very good I can suggest buyers can go for this oil and use it with confidence